Mains limit 200 kPa - Hydraulic Rain/ Mains Changeover Systems - Enter Energy & Water
Mains limit 200 kPa - Hydraulic Rain/ Mains Changeover Systems - Enter Energy & Water

Mains limit 200 kPa - Hydraulic Rain/ Mains Changeover Systems

Vendor
Enter Energy & Water
Regular price
$715.00
Sale price
$715.00
Tax included.
Quantity must be 1 or more

ZHR-800

FEATURES

  • Electronic Controller - Made in Italy
  • No in-tank float switch
  • Quick & Easy to install
  • AS/NZS 4020 Compliant for drinking water contact
  • Suitable for single & double storey homes
  • Automatically switches to mains in case of power failure
  • Watermarked dual check valve for back flow prevention

PERFORMANCE CURVE

MOTOR

  • Two-Pole induction motor (in=2900r/min)
  • Insulation Class F
  • Protection IP55

 

OPERATION LIMITS

  • Max. flow rate 75 L/m
  • Max. mains pressure - limited 200 kPa
  • Max. head 42m
  • Max. liquid temperature: 60°C
  • Max. ambient temperature: 40°C
  • Voltage 240V, 50Hz

 

MATERIALS

  • Pump body: AISI 304 Stainless steel
  • Impeller: Stainless Steel
  • Motor Shaft: Stainless Steel
  • Mech seal: Ceramic / Graphite / NBR

 

 

 

 

HHR-400/550 – SURFACE OPTION

APPLICATION

  • The HYJET HHR SERIES is an automatic Rain / Mains changeover pump system allowing tank water to be used for water supply in preference to mains water.
  • The HYJET HHR SERIES has a quality proven electronic pressure controller which automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if tank water is available.
  • The HYJET HHR SERIES will automatically switch to mains water when tank water is empty and in case of power failure. The HYJET HHR SERIES does not require an in-tank float switch which makes the system quick and easy to install.
  • The HYJET HHR SERIES has a mains pressure of 200 kPa

FEATURES

  • Electronic Controller with run dry protection
  • No in-tank float switch
  • Quick & Easy to install
  • AS/NZS 4020 Compliant for drinking water contact
  • Suitable for single & double storey homes (UP TO 4 OUTLETS TOILETS & LAUNDRY ONLY)
  • Automatically switches to mains in case of power failure
  • Watermarked dual check valve for backflow prevention

CONSTRUCTION

  • Pump body: AISI 304 Stainless steel
  • Impeller: Stainless steel
  • Motor Shaft: Stainless steel
  • Mech seal: Ceramic / Graphite / NBR

PERFORMANCE CURVE

TECHNICAL DATA

Power Max.Flow Max.Head Storey Connection
Pump Model (kW) (HP) (L/min) (m) Tap Qty Suitable for: Outlet (mm) Mains Inlet
HHR-400 0.37 0.50 55 36 3 Single 3/4"(M) 3/4"(M)
HHR-550 0.55 0.75 60 38 4 Single & Double 3/4"(M) 3/4"(M)

 

 

INSTALLATION GUILDE

 

 

 

 

HHR-370 – SUBMERSIBLE OPTION

FEATURES

  • Automatic pressure controller (Start & Stop on demand)
  • Run dry protection
  • Quick & Easy to install
  • Efficient on power consumption
  • Suitable for single & double storey homes (UP TO 4 OUTLETS TOILETS & LAUNDRY ONLY)
  • Automatically switches to mains in case of power failure
  • Watermarked dual check valve for backflow prevention

CONSTRUCTION

  • Pump casing: Stainless steel AISI 304
  • Motor shaft: Stainless steel AISI 304
  • Impellers: Technopolymer
  • Diffuser: Technopolymer
  • Double mechanical seal: silicon carbide – graphite / ceramic – graphite
  • Motor IP68
  • Cooled motor (by water) of Class F and thermal protection
  • Electric power cable HO7RN 5m with 3 pin

 

TECHNICAL DATA

Power Max.Flow Max.Head Storey Connection
Pump Model (kW) (HP) (L/min) (m) Tap Qty Suitable for: Outlet (mm) Mains Inlet
HHR-370S 0.37 0.50 82 36 4 Single & Double 3/4"(M) 3/4"(M)